MK3713 Overview
The MK3713 is ICS/MicroClock’s lowest cost, low jitter, high performance 3.3 Volt VCXO designed to replace expensive VCXO modules. The on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3.3 V input voltage to cause the output clocks to vary by ±100 ppm. Using ICS/MicroClock’s patented VCXO and analog Phase-Locked Loop (PLL) techniques, the device uses an inexpensive external pullable crystal input to...
MK3713 Key Features
- Packaged in 8 pin SOIC
- Ideal for T1 and E1 VCXOs
- Output range of 1.25 MHz to 10 MHz
- For a 10-20 MHz output range, use the MK3711
- For higher than 20 MHz, use the MK3732-05
- 3.3 V only operating voltage
- Uses an inexpensive 10
- 20 MHz external crystal
- On-chip VCXO (patented) with pull range of 200ppm (minimum)
- VCXO tuning voltage of 0 to 3.3 V
MK3713 Applications
- Packaged in 8 pin SOIC
- Ideal for T1 and E1 VCXOs
- Output range of 1.25 MHz to 10 MHz
- For a 10-20 MHz output range, use the MK3711
- For higher than 20 MHz, use the MK3732-05